Sales@fiberhtt.com
HTT P/N: | HCP100G-CFP2+ER4 |
Form Type: | CFP2 |
Max Data Rate: | 100G |
Max Cable Distance: | 40km |
Wavelength: | 1296nm/1300nm/1305nm/1309nm |
Temperature: | 0°C to 70°C, -40°C to +85°C |
Customization: | Provide customized services |
FIBERHTT 100G CFP2 ER4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of 1296nm, 1300nm, 1305nm and 1309nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a SOA to amplify,then go to PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.
The module provides an aggregated signaling rate from 103.125 Gbps to 111.81 Gbps. It is compliant with IEEE 802.3-2012 Clause 88 100GBASE-ER4. The MDIO management interface complies with IEEE 802.3-2012 Clause 45 standard. The transceiver complies with CFP MSA CFP2 Hardware Specification Rev. 1.0, CFP MSA Management Interface Specification Rev. 2.2, and OIF CEI-28G-VSR standards. A block diagram is shown in Figure 1.
HCP100G-CFP4+LR4 100Gb/s CFP4 LR4 Transceiver
HCP100G-CFP2+ER4 100Gb/s CFP2 ER4 Transceiver
HCP100G-CFP2+LR4 100Gb/s CFP2 LR4 Transceiver